CBM110 – USB BRIDGE / AGGREGATOR

Overview

FPGA based Module for Camera and Display applications on the edge. Expand the capabilities of your SoC, multiply the number of needed interfaces, increase flexibility of the system, be future proof. High performance and flexible Module.

Speed up your prototype development and proof of concept faze, up to small series, by using highly integrated Module in space saving 10x10mm LGA package. Allows for Simple 4x Layer PCB technology, in system update over I2C or UART for future upgrades.

Specification

Highlights

Up to 2x High-speed 10Gbps/Ports
Up to 8x Camera/Display Interfaces
Supported standards Open LDI, CSI, DSI, LVDS, Parallel
Dual Bitstream
Single Supply operation
uC for user-specific configuration

Package:	10×10 mm, LGA108 – 0.65mm pitch
Logic Cells:	33K
Connectivity:	4x Camera/Display RX/TX Flex Ports
Video:	2x 4-Lane Soft D-PHY CSI/DSI Ports (up to 1.2Gbps/Lane) Built-In FrameBuffer up to 3.2Gbps
Peripherals:	Build in clock generator / Integrated Flash / Integrated SRAM / USB3.2 Native interface

CBM 110 USB Bridge / Aggregator Module render

Get all specifications!

Download

CB110 USB Bridge/ Aggregator Block Diagram

Applications

Video Aggregation merging multiple Video Stream and stream over USB
Video Interface Bridge LVDS to CSI, CSI to DSI, Parallel to USB 3.2
Video Pre-Processing (ISP) Rotation, Demosaic, corrections, RGB gain
Pattern generators for Test Equipment.